magnets die cut

Anything goes, sign related or otherwise. Other
manufacturers discussion welcome.

Post Reply
watchdaride
Posts: 61
Joined: Wed Aug 26, 2009 12:31 pm

magnets die cut

Post by watchdaride » Thu Jan 27, 2011 11:25 am

I have a mechanic shop want some small decals 2" x 4" on magnets cut out like a screw driver . Any idea how to cut out the magnets shape . I have a anagraph plotter. Can a vinyl cutter cut through that stuff with out damaging the cutter?

Muts
Site Admin
Posts: 842
Joined: Thu Jan 26, 2006 11:40 pm
Location: New Jersey
Contact:

Re: magnets die cut

Post by Muts » Thu Jan 27, 2011 12:09 pm

yup, atleast my summa does.

get the thin stuff 10 mil 15 mil cut with 60 degree blade.

magnetsource - http://www.magnetsource.com/

you want to sheet feed the machine keeping the magnetic in small pieces you can not load it like a roll of vinyl. You just need a good score on the material

Weeding - I put it on a big piece of foam and push through it, sometimes using a small flat head screw driver...for the small stuff....

watchdaride
Posts: 61
Joined: Wed Aug 26, 2009 12:31 pm

Re: magnets die cut

Post by watchdaride » Thu Jan 27, 2011 12:28 pm

cool thanks for the tips .

Post Reply