SUMMA DC4 SX
-
Signguy 95
- Posts: 4
- Joined: Tue Mar 10, 2015 10:45 am
SUMMA DC4 SX
Anyone know what drum right (x2-axis) code means
-
PhilJohnson
- Posts: 23
- Joined: Tue Sep 07, 2010 7:44 pm
Re: SUMMA DC4 SX
Hi SignGuy,
This error message is typically caused by one of three things; a defective motor(least likely), the material being too taut on the roll support or you're at the end of the roll, or you don't have your right pinch wheel set in one of the correct pinch wheel locations. I would check the latter two items first and if those don't correct the issue then I would contact our support team to see if this is being caused by a defective motor. Their number is (800)323-9766.
Best regards,
Phil Johnson
Summa Inc.
This error message is typically caused by one of three things; a defective motor(least likely), the material being too taut on the roll support or you're at the end of the roll, or you don't have your right pinch wheel set in one of the correct pinch wheel locations. I would check the latter two items first and if those don't correct the issue then I would contact our support team to see if this is being caused by a defective motor. Their number is (800)323-9766.
Best regards,
Phil Johnson
Summa Inc.
Re: SUMMA DC4 SX
Im super glad to see someone from Summa monitoring the forum.
wheres the 'like' button...
wheres the 'like' button...
-
PhilJohnson
- Posts: 23
- Joined: Tue Sep 07, 2010 7:44 pm
Re: SUMMA DC4 SX
I'll be checking the forum a few times a week and I am happy to help out with any questions or concerns anybody might have. You guys can also email me at philj@summa.us if you need anything as well.
Best regards,
Phil Johnson
Summa Inc.
Best regards,
Phil Johnson
Summa Inc.